Support
Home > Fast Support HowTo > EM/EMX Support
EM Appliance Support Information
Welcome to the EtherDrive® Mirror (EM) support page.
Documentation
| EM20090716.pdf - EM Command Reference Manual | |
| The Command Reference Manual describes the user interface to the EM Appliance. | |
| EMconfiguration.pdf - EM Configuration Guide | |
| The EM Configuration Guide outlines the recommended physical configuration of the EM and EM-FT, along with tips and quickstart examples. | |
| EM FAQ - List of frequently-asked questions | |
| The EM FAQ contains answers to the most frequently-asked questions. | |
Related Software
| CEC client - Coraid Ethernet Console client | |
| This CEC client will compile and run on linux, solaris, and bsd flavors supporting bpf. | |
Updates
EM firmware updates are released as a single binary image and are applied as described in Appendix A of the Command Reference Manual.
EM20090811 - Update release 20090811
[ md5sum: b092cf5203f5fe39f9e8ae79cc924785 ]
enable fast reuse of lun ids bugfix: rebuild state not consistent across reboots due to config update problem bugfix: device failures do not persist due to config update problem bugfix: alarm states not triggered for failed devices on boot bugfix: masks on partition luns can get corrupted
See the Changelog for a full list of release changes.
Release Notes
The EM has the following known limitations:
- Does not support config strings on exported LUNs. This means the EM cannot be used by Windows or Mac initiators, or the VS.
- Shelf address cannot be changed once LUNs are defined.
These issues are under review for resolution in future releases.
For questions/comments, please contact support@coraid.com.